• 2166 Zeus Court Bakersfield, CA 93308, USA
M500 Series
Expand

M-500 Series (5-10 HP)

60Hz M502T M504T M506T M530T M536T M554T M556T
Discharge Connection (inches) 4″/3″ 4″/3″ 3″ 4″ 3″ 4″ 3″
Rated Power (HP/kW) 5/3.7 5/3.7 5/3.7 7.5/5.5 7.5/5.5 10/7.5 10/7.5
Speed (rpm) 3400 3400 3400 3400 3400 3400 3400
Rated Current @ 230v (3 Ph.) 14.2A 14.2A 14.2A 22A 22A 28A 28A
Rated Current at 460v (3 Ph.) 7.1A 7.1A 7.1A 11A 11A 14A 14A
Rated Current at 575v (3 Ph.) 5.68A 5.68A 5.68A 8.8A 8.8A 11.2A 11.2A
Solids Passage (mm, inches) (25 x 6), 1″ x1/4″ (25 x 6), 1″ x1/4″  6, 1/4″ (30 x 9.5), 1-3/16″ x 3/8″  6, 1/4″ (30 x 9.5), 1-3/16″ x 3/8″  6, 1/4″
Submergence (min, max) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m)
Height (mm, inches) 641.35, 25 1/4″ 641.35, 25 1/4″ 641.35, 25 1/4″ 724, 28 1/2″ 724, 28 1/2″ 749.3, 29 1/2″ 749.3, 29 1/2″
Weight (kg/lbs] 50/110 50/110 52/115 59/130 61/135 64/142 67/147

 

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. 6 Core with thermal overloads optional.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT

Epoxy coated Aluminum Outer Casing

Epoxy coated Extruded Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate. Polyurethane Optional.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH Range 5 – 8

PUMP SELECTOR