Expand

60Hz M902T M906T
Discharge Connection – (inches)  8″  6″
Rated Power – (HP/kW) 35/26 35/26
Speed – (rpm)  3400 3400
Rated Current @ 230v (3 Ph.) 88A 88A
Rated Current at 460v (3 Ph.) 44A 44A
Rated Current at 575v (3 Ph.) 35.2A 35.2A
Solids Passage – (mm, inches) (25.5×10), 1-9/16″ x 3/16″ 10, 3/8″
Submergence – (min, max) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m)
Height – (mm, inches) 1029/ 40.5″ 1029/ 40.5″
Weight – (kg/lbs) 232/ 510 239/525

 

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT

Epoxy coated Steel Outer

Casing Epoxy coated Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH Range 5 – 8

Downloads

BROCHURE

Brochure – M900

 

PERFORMANCE CURVE

Performance curve – M902

Performance Curve -M906