• 2166 Zeus Court Bakersfield, CA 93308, USA
MHC4
Expand

MHC4 (7.5-10)

60Hz MHC 4-7.5 MHC 4-10
Discharge Connection – (inches) 4” 4”
Power Range – (HP/kW) 7.5/5.6 10/7.5
Max Flow Range – (GPM) 200 200
Max Shut-Off Head – (Feet) 50 55
Solids Handling – (inches) 1.4” 1.4”
Impeller Type Two Vane Semi Open
Power Supply 230/380/460/575 volts Yes
Insulation Class  H
Max Starts/Stop per hour 15
Wet Ends  28% Hi Chrome
Motor- VFD rated 4 Poles

 

Specifications

MOTOR

4-pole induction continuous rated motor with squirrel cage rotor. Bi-metallic switches (thermals) embedded in stator winding to protect against overheating. Stator insulation class ‘H’ (180ºC), 1.15 Service Factor.

POWER SUPPLY

3 phase, 60 Hz, AC Supply, 208, 230,460,575. Other voltages available upon request.

BALL BEARINGS

The rotor shaft is carried on a double row angular contact ball bearing which carries the high thrust and radial loads. The Upper bearing is a deep groove ball bearing. The bearings are enclosed with high temperature grease containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 25ft. (7.6m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU with Trailing cable for thermals and seal probe sensor.

SHAFT SEALS

Double Mechanical Seals, outer and inner are Silicon Carbide, both rotating and stationary faces. Equipped with Moisture Sensor to detect progressive seal wear.

Downloads

BROCHURE

Mody MHC Flyer

 

MANUAL

MHC 4_7.5HP

MHC 4_10HP 

 

PERFORMANCE CURVE

MHC4

PUMP SELECTOR