G1000-Series
G1002
G1006

G-1000 Series (37kW)

50Hz	G1002T	G1006T
Discharge Connection – (mm)	200	150
Rated Power – (HP/kW)	50/37	50/37
Speed – (rpm)	2800	2800
Rated Current at 400v (3 Ph.)	62A	62A
Rated Current at 575v (3 Ph.)	43.1A	43.1A
Solids Passage – (mm, inches)	(25.5×10), 1-9/16″ x 3/16″	13, .5″
Submergence – (min, max)	Min – 5″ (127mm), Max – 50′(15m)	Min – 5″ (127mm), Max – 50′(15m)
Height – (mm, inches)	1055/ 41.5″	1055/ 41.5″
Weight – (kg/ lbs)	248/ 545	375/825

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. 6 Core or Control cable with thermal overloads optional.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT (G1002)

Epoxy coated Steel Outer Casing

Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH Range 5 – 8

CORROSION RESISTANT (G-1006)

Epoxy coated Steel Outer

Casing Cast Iron Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate.