MSVSS Series 60Hz
| MSVSS05-1 | MSVSS1-1 | MSVSS2-1 | MSVSS2-3 | MSVSS3-3 | MSVSS3-5 | MSVSS4-7.5 | MSVSS4-10 | |
| kW | 0.4 | 0.75 | 1.5 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 |
| HP | 0.5 | 1 | 2 | 2 | 3 | 5 | 7.5 | 10 |
| Phase | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 |
| Voltage | 120 | 120 | 240 | 240/480 | 240/480 | 240/480 | 240/480 | 240/480 |
| Amps | 7.5 | 11 | 12 | 7/3.5 | 9/4.5 | 16/8 | 20/10 | 28/14 |
| Auto Float | Yes | Yes | No | No | No | No | No | No |
| Frequency | 60Hz | 60Hz | 60Hz | 60Hz | 60Hz | 60Hz | 60Hz | 60Hz |
| Speed | 3450 | 3450 | 3450 | 3450 | 3450 | 3450 | 3450 | 3450 |
| Discharge | 2″ | 2″ | 2″/3″ | 2″/3″ | 3″ | 3″ | 4″ | 4″ |
| Solids Size (in) | 1.4 | 1.4 | 1.6 | 1.6 | 1.75 | 1.75 | 2 | 2 |
| Solids Size (mm) | 35 | 35 | 40 | 40 | 45 | 45 | 50 | 50 |
| Weight (kg) | 15 | 18 | 36 | 36 | 60 | 63 | 73 | 78 |
| Weight (lbs) | 33 | 40 | 79 | 79 | 132 | 139 | 161 | 172 |
Specifications
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor.
Stator insulation class ‘H’ (180oC)
Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz
Power Rating : 0.5HP – 10HP @ 60 Hz, 0.4 – 7.5kW @ 50Hz Full Load
Current FLA: Refer To Chart
Max. temperature of the pump liquid : 104°F/40°C
Max. start/stop per hour : 15
POWER SUPPLY
3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency
combination. (120/208/220/230/380/415/460/575/1000V) Moisture sensor available
in 3 Phase configurations only with thermal protection that require External Controls.
In-Built bi-mettalic switches in the winding which trips at excessively high motor
temperatures in Single Phase Motors.
BALL BEARINGS
The rotor shaft is carried in two single row, deep groove ball bearings.
The bearings are enclosed with high temperature grease-containing special
Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor
flexible cable, 50ft. (15m) length standard. Type SOOW in North America,
EPR in the Middle East and HO7RN in the EU.
SHAFT SEAL
Double Silicon Carbide/Silicon Carbide and Carbon/Ceramic Mechanical seals.
CORROSION RESISTANT
Stator Casing: 316 Stainless Steel (CF8M)
Wear plate: 316 Stainless Steel (CF8M)
Shaft: 316 Stainless Steel (CF8M)
Hardware: 316 Stainless Steel (CF8M)
Impeller: Vortex Stainless Steel (CF8M)
Volute: 316 Stainless Steel (CF8M)
pH Range 3 – 11
SUBMERGENCE
Submergence below liquid surface: Refer to Chart Dimension H1
WEIGHTS
Refer to Specifications Chart