• 2166 Zeus Court Bakersfield, CA 93308, USA
Expand

MHC8B (55-110kW)

50Hz MHC8-75 MHC8-100 MHC8-125 MHC8-150
Discharge Connection- mm 250mm 250mm 250mm 250mm
Power Range [Kw] 55 75 91 110
Max Flow Range – m3/hr 450 540 630 630
Max Shut-Off Head- m 55 62 67 72
Solids Handling- mm 75mm 75mm 75mm 75mm
Impeller Type Two Vane Semi Open
Power Supply 230/380/400/575 volts Yes
Insulation Class H
Max Starts/Stop per hour 15
Wet Ends 28% Hi Chrome
Motor- VFD rated 4 Poles

 

Specifications

MOTOR

4-pole induction continuous rated motor with squirrel cage rotor. Bi-metallic switches (thermals) embedded in stator winding to protect against overheating. Stator insulation class ‘H’ (180ºC)

POWER SUPPLY

3 phase, 50 Hz, AC Supply, 400V. Other voltages available upon request.

BALL BEARINGS

The rotor shaft is carried on a double row angular contact ball bearing which carries the high thrust and radial loads. The Upper bearing on units up to 40HP is a deep groove ball bearing; on 50HP and above it is fitted with a roller bearing. The bearings are enclosed with high temperature grease containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 25ft. (7.6m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. Optional Trailing cable for thermals and seal probe sensor.

SHAFT SEALS

Double Mechanical Seals, outer and inner are Silicon Carbide, both rotating and stationary faces. Equipped with Moisture Sensor to detect progressive seal wear.

Downloads

BROCHURE

Mody MHC Flyer 60

 

PERFORMANCE CURVE

MHC8B

PUMP SELECTOR