• 2166 Zeus Court Bakersfield, CA 93308, USA
Expand

G-1000 Series (58HP)

60Hz G1002T G1006T
Discharge Connection – (inches)  8″  6″
Rated Power – (HP/kW) 58/43 58/43
Speed – (rpm)  3400  3400
Rated Current at 460v (3 Ph.)  64A 64A
Rated Current at 575v (3 Ph.)  51.2A 51.2A
Solids Passage – (mm, inches) (25.5×10), 1-9/16″ x 3/16″ 13, .5″
Submergence – (min, max) Min – 5″ (127mm), Max – 50′(15m) Min – 5″ (127mm), Max – 50′(15m)
Height – (mm, inches) 1055/ 41.5″ 1055/ 41.5″
Weight – (kg/lbs) 248/ 545 375/825

 

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. 6 Core or Control cable with thermal overloads optional.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT (G1002)

Epoxy coated Steel Outer Casing

Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH Range 5 – 8

CORROSION RESISTANT-(G-1006)

Epoxy coated Steel Outer Casing

Cast Iron Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH range 6 – 11

PUMP SELECTOR