G-1200 Series (90HP)
|Discharge Connection – (inches)||10″||6″|
|Rated Power -(HP/kW)||90/67||90/67|
|Speed – (rpm)||3400||3400|
|Rated Current at 460v (3 Ph.)||105A||105A|
|Rated Current at 575v (3 Ph.)||84A||84A|
|Solids Passage – (mm, inches)||15mm x 45mm||15mm x 45mm|
|Submergence – (min, max)||Min – 16″ (400mm), Max – 65′(20m)||Min – 16″ (400mm), Max – 65′(20m)|
|Height – (mm, inches)||1538/60.55″||1538/60.55″|
|Weight – (kg/lbs)||600/1334||600/1334|
4-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)
Single row deep groove upper bearing. Double Row Max Capacity Lower bearing. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. 8 Core with thermal overloads/seal probe sensor optional.
Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in an oil chamber.
Epoxy coated Steel Outer Casing
Aluminum Stator Casing and Top Bracket
Nitrile Rubber– Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 56HRC is Standard.
pH range 5 – 8