M200
M204
M404

M-200 Series (2.2 – 3.7kW)

50Hz	M204T	M204ST	M404T
Discharge Connection – (mm)	80	80	80
Rated Power – (HP/kW)	3/2.2	3/2.2	5/3.7
Speed – (rpm)	2800	2800	2800
Rated Current @ 110v (1 Ph. )	N/A	N/A	N/A
Rated Current @ 220v (1 Ph.)	N/A	39.7A	N/A
Rated Current @ 220v (3 Ph.)	10A	N/A	14.5 A
Rated Current at 400v (3 Ph.)	5.79A	N/A	7.71 A
Rated Current at 575v (3 Ph.)	3.83A	N/A	5.57A
Solids Passage – (mm, inches)	6, 1/4″	6, 1/4″	6, 1/4″
Submergence – (min, max)	Min – 5″ (127mm), Max – 50′(15m)	Min – 5″ (127mm), Max – 50′(15m)	Min – 5″ (127mm), Max – 50′(15m)
Height – (mm, inches)	666.75, 26 1/4″	724, 28 1/2″	724, 28 1/2″
Weight – (kg/ lbs)	35/77	40/88	36/79

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor.Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. 6 Core with thermal overloads optional.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT

Epoxy coated Extruded Aluminum Outer Casing

Epoxy coated Extruded Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate. Polyurethane Optional.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH range 5 – 8