M700 Series
M702
M706

M-700 Series (12kW)

50Hz	M702T	M706T
Discharge Connection – (mm)	150	100
Rated Power – (HP/kW)	16/12	16/12
Speed – (rpm)	2800	2800
Rated Current @ 220v (3 Ph.)	43.2A	43.2A
Rated Current at 400v (3 Ph.)	25A	25A
Rated Current at 575v (3 Ph.)	16.5A	16.5A
Solids Passage – (mm, inches)	(25.5×5), 1-3/16″ x 3/16″	10, 3/8″
Submergence – (min, max)	Min – 5″ (127mm), Max – 50′(15m)	Min – 5″ (127mm), Max – 50′(15m)
Height – (mm, inches)	845, 33.25″	845, 33.25″
Weight – (kg/lbs)	127/280	140/310

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT

Epoxy coated Steel Outer Casing

Epoxy coated Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH Range 5 – 8