M900 Series
M902
M906

M-900 Series (26kW)

50Hz	M902T	M906T
Discharge Connection – (mm)	200	150
Rated Power – (HP/kW)	35/26	35/26
Speed – (rpm)	2800	2800
Rated Current @ 220v (3 Ph.)	92.7A	92.7A
Rated Current at 400v (3 Ph.)	51A	51A
Rated Current at 575v (3 Ph.)	35.5A	35.5A
Solids Passage – (mm, inches)	(25.5×10), 1-9/16″ x 3/16″	10, 3/8″
Submergence – (min, max)	Min – 5″ (127mm), Max – 50′(15m)	Min – 5″ (127mm), Max – 50′(15m)
Height – (mm, inches)	1029/ 40.5″	1029/ 40.5″
Weight – (kg/lbs)	232/ 510	239/525

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)

BALL BEARINGS

Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT

Epoxy coated Steel Outer

Casing Epoxy coated Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser/Wear plate.

Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH Range 5 – 8