MS 400 SERIES (7.5kW)
|Discharge Connection – (mm)||100 mm||150mm||150mm|
|Power – (kW)||7.5||7.5||7.5|
|Max Flow Range – (LPM)||3300||4700||5200|
|Max Shut-Off Head – (m)||26||18||11|
|Solids Handling – (mm)||75||100||75|
|Power Supply 230/380/460/575 volts||Yes||Yes||Yes|
|Cooling jacket system -optional||No||No||No|
|Max Starts/Stop per hour||15||15||15|
|Motor- VFD rated||4 Poles||4 Poles||4 Poles|
2/4 pole induction continuous rated motor with squirrel cage rotor. Bi-metallic switches (thermals) embedded in stator winding to protect against overheating. Stator insulation class ‘H’ (180ºC)
3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency combination.(208/220/230/380/415/460/575/1000V)
The rotor shaft is carried in two ball bearings. Double row contact lower bearing is capable of carrying high thrust and radial loads. Upper bearing is a deep groove single row oversized bearing. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. (4 core std., 7 core optional)
Compact Tandem Tungsten Carbide/Tungsten Carbide Upper & Lower Mechanical seals minimize shaft overhang and deflection maximizing mean time between service intervals. Moisture sensor available to detect progressive seal wear.