M100 Series
M100
M120
M154

M-100/120 Series (1.3 – 1.5kW)

50Hz	M100T	M100ST	M120T	M154T	M154ST
Discharge Connection (mm)	50	50	50	50	50
Rated Power – (HP/kW)	1/1.3	1/1.3	1.5/2	2/1.5	2/1.5
Speed [rpm]	3400	3400	3400	2800	2800
Rated Current @ 110v (1 Ph. )	N/A	19A	N/A	N/A	N/A
Rated Current @ 220v (1 Ph.)	N/A	9.5A	N/A	N/A	14
Rated Current @ 220v (3 Ph.)	N/A	N/A	N/A	7.09A	N/A
Rated Current at 400v (3 Ph.)	2.3A	N/A	3.9A	4.11A	N/A
Rated Current at 575v (3 Ph.)	1.6A	N/A	2.72A	2.72A	N/A
Solids Passage (mm, inches)	6, 1/4″	6, 1/4″	6, 1/4″	6, 1/4″	6, 1/4″
Submergence (min, max)	N/A	N/A	N/A	Min – 5″ (127mm), Max – 50′(15m)	Min – 5″ (127mm), Max – 50′(15m)
Height (mm, inches)	419, 16.5″	425.45, 16.75″	431.8, 17″	641.35, 25 1/4″	666.75, 26 1/4″
Weight (kg/lbs)	35/16	39/18	39/18	28/62	35/77

Specifications

MOTOR

2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC).

BALL BEARINGS

The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. Type SOOW in North America, EPR in the Middle East and HO7RN in the EU. 6 Core with thermal overloads optional.

SHAFT SEAL

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.

CORROSION RESISTANT

Epoxy coated Aluminum Outer Casing Epoxy coated

Extruded Aluminum Stator Casing

Nitrile Rubber– Lined Diffuser.

Polyurethane Optional. Shaft: 431 Stainless Steel

Hardware: 304 Stainless Steel

Impeller: Nitride Hardened 410SS to 56HRC is Standard.

pH Range: 5 – 8